Dulux Trade Stain Block Primer

A 2-in-1 problem solving primer that seals and binds surfaces and blocks common stains
Size
Paint Calculator
This product is currently out of stock, please visit a store or other online retailers.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Interior walls & ceilings
  • For stains including smoke damage, nicotine & inks
  • Seals powdery surfaces, limewash and distemper
  • Water based
Technical Information
  • Finish Matt
  • Coverage Up to 14m² per litre.
  • Drying Time Dependent on temperature and humidity
  • Recoatable After 6-12 hours. Note - this product can usually be recoated within 6-8 hours - but on very porous surfaces a longer drying time may be required.
  • Composition Water-based
Product Features
  • Fantastic Dulux Quality

Product Description

Dulux Trade Stain Block Primer is a water-based primer suitable for use on interior walls and ceilings. It is formulated to prevent the migration of stains through the finished paint film and also to seal and bind dry, friable and powdery interior surfaces such as plaster, brick and distemper. It is the effective treatment for stains caused by: water-based and solvent-based inks, crayon, biro, coffee, grease, scuff marks, water and nicotine.

Application Description

Application : Brush or short pile roller. Do not spray. STIR THOROUGHLY BEFORE USE. After suitable surface application, apply 1 coat of Dulux Trade Stain Block Primer to all bare or stained surfaces to allow to dry. Two coats will be necessary for difficult stains. Finish with an appropriate Dulux Trade paint system.

Technical & Safety Documentation

Tips & Advice

  • 1. Preparing the Surfaces
    To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). See Dulux Trade Datasheet 307 for full information before use, available free on request by telephoning 0333 222 70 70 or visiting duluxtrade.co.uk. Before surface preparation read the Health & Safety information about old lead paints.
  • 2. Cleaning
    After use, remove as much paint as possible from brushes before cleaning with water
  • 3. Storing
    Do not use or store in extremes of temperature and protect from frost
Fetching the data, plz wait..