Dulux Trade Plus Smooth & Protect +

Size
Paint Calculator
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Part 3 of Dulux Trade Plus Thermacoat+ system:protective mid-coat
Technical characteristics
Technical Information
  • Finish Matt
  • Coverage 1m² per litre
  • Recoatable 12 hours
  • Composition Water-based
Product Features
  • Fantastic Dulux Quality

Product Description

Dulux Trade Plus Smooth & Protect+ is part 3 of the 3 part Dulux trade Plus Thermacoat+ system. It has been specially designed to provide a protective mid-coat for the Dulux Trade Plus Thermacoat+ system, providing a smooth, flat finish that can be painted with any suitable interior Dulux Trade emulsion.

Application Description

We recommend reading the Dulux Trade Plus Smooth & Protect + Product Datasheet for full information available free on request by telephoning 0333 222 70 70 (ROI 021 422 0222) or visiting duluxtrade.co.uk. Dulux Trade Plus Smooth & Protect+ is ready to use. Do not dilute. Wear gloves, dust mask, arm and eye protection. For use over Dulux Trade Plus Thermacoat+ and Dulux Trade Plus levelling Fleece. Using a plastic spatula or flat trowel gently apply a 1mm layer on top of dry Dulux Trade Plus Thermacoat+ and Dulux Trade Plus Levelling Fleece. Distribute evenly until a smooth , flat finish is achieved. Leave to dry (minimum 12 hours depending on conditions). Before lightly sanding with very fine (240+ Grit) sandpaper and paint with any suitable interior Dulux Trade emulsion. Tip: for best results thin first coat 9up to 1 part clean water to 10 parts paint) Please note the Dulux trade Plus Thermacoat+ system can take up to 7 days to fully cure and gain full strength. This product should not be used in areas where condensation is a problem eg kitchens and bathrooms

Technical & Safety Documentation

  • DT_GB_EN_PLUS_SMOOTH___PROTECT+.pdf
  • Dulux Trade Plus Smooth Protect+ tds.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    We recommend reading the Dulux Trade Plus Smooth & Protect + Product Datasheet for full information available before use, available free on request by telephoning 0333 222 70 70 (ROI 021 422 0222) or visiting duluxtrade.co.uk. For interior use only. Do not thin. Preparation Summary:Ensure parts 1 & 2 of the Dulux Trade Plus Thermacoat + system have been applied as specified and are dry, ready for part 3 (Dulux Trade Plus Smooth & Protect +) to be applied.
  • 2. Cleaning
    After use scrape any re-usable product from tools back into the pack for reuse and then clean tools with water.
  • 3. Storing
    Do not use or store in extremes of temperature and protect from frost