Cuprinol Naturally Enhancing Teak Oil Spray

Faster and easier way to protect and nourish wood
This product is not for online sale and can only be purchased from selected stores.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Protects and nourishes the wood
  • Replaces the natural oils lost through weathering
  • Water based
Technical Information
  • Coverage 500ml covers up to 12m² in 1 coat.
  • Composition Water-based
Product Features
  • Easy application

Product Description

Cuprinol Naturally Enhancing Teak Oil Spray offers a faster and easier natural finish for teak and similar hardwoods. It protects and enhances the wood by replacing the natural oils lost through weathering, helping to restore the appearance of old furniture and maintain the colour and appearance of new furniture.

Application Description

Apply 2 light even coats from a distance of approximately 15cm (6 inches) wiping off excess between coats. Do not concentrate spray on one spot. Allow 15 minutes between coats, longer if the wood still feels sticky. Please note that this product is not suitable for use on toys.

Technical & Safety Documentation

Tips & Advice

  • 1. Preparing the Surfaces
    Remove excess dirt and soiling, large areas of algae, lichen, fungi or moss with a scraper or stiff brush. Treat the surface with a suitable cleaner like Cuprinol Garden Furniture Cleaner or a fungicidal wash. For grey and weathered garden furniture use a product like Cuprinol Furniture Restorer to bring back the natural colour. Cuprinol Naturally Enhancing Teak Oil Spray is only suitable for use on bare or previously oiled wood.
  • 2. Cleaning
    After use wipe the nozzle clean with a damp cloth. When using again in case of blockage unscrew the nozzle from the spray bottle, place the dip tube into a container of clean water and spray until it comes clean through the nozzle.
  • 3. Storing
    Do not use or store in extremes of temperature or wet conditions
Fetching the data, plz wait..