Cuprinol Garden Furniture Restorer

Restores grey, weathered wood to its original colour
Size
Paint Calculator
This product is currently out of stock, please visit a store or other online retailers.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Restores grey, weathered wood back to original colour
  • Works in 15 minutes
  • Ideal before treating with furniture oil or stain
  • Water based
Technical Information
  • Coverage A 1L tub is normally sufficient for 8m2 in 2 coats.Coverage can vary depending on application method and the condition and nature of the surface
  • Composition Water-based
Product Features
  • Long lasting

Product Description

Cuprinol Garden Furniture Restorer is an easy to use gel that removes the grey, weathered surface wood to reveal the golden timber below. Simply brush on, scrub if needed, leave for 15 minutes and rinse off.

Application Description

Stir thoroughly before use. Wearing suitable protective gloves, apply liberally with a paint brush. The wood will start to lighten in colour. Immediately after application, work into the surface of the wood using a mild abrasive scrubbing pad or stiff bristle brush. Leave to stand until no further lightening occurs, but for no more than 15 minutes. Work manageable areas at a time so that application, abrasion and washing off can be completed within 15 minutes. Wash off with plenty of water using a watering can or hose. Do not use a high pressure washer. Allow the furniture to dry thoroughly before use. In cases of severe weathering a further coat may be necessary to fully restore the colour. If necessary, sand the wood to remove loose fibres and give a smooth base before finishing with an appropriate oil or stain. Do not apply in temperatures below 5C or if rain is likely before the job is complete.Protect any areas underneath the garden furniture being restored. Cuprinol Garden Furniture Restorer should not be allowed to come into contact with grass or plants as it may cause browning or die-back. When washing off, avoid splashing onto plants or grass. If this occurs, dilute splashes with copious amounts of water.

Technical & Safety Documentation

Tips & Advice

  • 1. Preparing the Surfaces
    Remove excessive dirt and soiling, large areas of algae, lichen, fungi or moss with a scraper or stiff brush. Only suitable for use on bare or previously oiled wood.
  • 2. Cleaning
    Remove as much restorer as possible from brushes before cleaning with water. Clean up any spills while still wet.
  • 3. Storing
    Do not use or store in extremes of temperature or wet conditions
Fetching the data, plz wait..