Cuprinol Ultimate Garden Wood Preserver

Select a colour for this paint

Quantity

Size Pack

About this product

Cuprinol Ultimate Garden Wood Preserver has a superior quick drying formulation that works in 3 ways: UV filters give long lasting colours for up to 5 years, added waxes & resins provide advanced weather protection and active ingredients penetrate deep into the wood to protect against rot, decay and blue stain. It can be used on all types of rough or smooth planed wood items such as sheds, fences,

summerhouses, gates and arbours.

Show more Show less

Datasheet & Documents

CX GB EN ULTIMATE GARDEN WOOD PRESERVER.pdf

CLP MSDS

CX GB EN ULTIMATE GARDEN WOOD PRESERVER.pdf

CLP MSDS

Download All

Key Benefits

5 year performance
Preserves against rot, decay and blue stain
Protects with its wax enriched formula
Water based

Special Features

Easy application

Technical Information

Coverage:

4L covers up to 20m2 on smooth planed wood and 12-16m2 on rough sawn wood in 2 coats.Coverage may vary depending on the condition and nature of the surface

About this product

summerhouses, gates and arbours.

Show more Show less

Datasheet & Documents

CX GB EN ULTIMATE GARDEN WOOD PRESERVER.pdf

CLP MSDS

CX GB EN ULTIMATE GARDEN WOOD PRESER ...

CLP MSDS

Download All

Product Information

Typical Use

Read the Health, Safety and Environmental information. Surfaces should be dry and free from dirt and algae etc. remove any algae, lichen, fungi or moss using an appropriate fungicidal wash or cleaner designed for the job. Wood that has been woodstained, painted, or varnished should be stripped back to bare wood and treated as bare wood. Not suitable for use on timber in ground contact situations.

Composition

Water-based

Key Benefits

5 year performance, Preserves against rot, decay and blue stain, Protects with its wax enriched formula, Water based

Pack size

1L, 4L

Application Method

Application by brush: Apply a minimum of two even brush coats to give a uniform finish. Allow the previous coat to soak in before applying the next. Usually 2-6 hours under normal weather conditions. Please note that the type of wood and any previous treatment will affect colour. Try a representative test area first to ensure colour is acceptable when dry. Do not apply in temperatures or if rain is likely before the product has dried. Apply evenly, avoiding splashing of surrounding plants, brickwork, glass, PVCu etc. Any splashing should be cleaned up immediately (whilst still wet) with water and household detergent. Excessive spillage on plants should be rinsed off immediately before drying. Where a strong colour change is involve, more coats may be required. If using more than 1 pack it is advisable to mix them together in a larger container or finish in a corner before starting a new pack. This product is wax enriched to repel water. Recoat within 2-3 days of previous coat. if a longer period elapses try a test area to ensure product is not repelled.