Dulux Trade Wood Primer

A good, general purpose solvent-based primer suitable for use on all types of soft and hard woods, inside and outside.
Size
Paint Calculator
This product is currently out of stock, please visit a store or other online retailers.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Softwoods & hardwoods
  • For interior & exterior use
  • Helps provide excellent adhesion.
  • Solvent-based
Technical Information
  • Finish Matt
  • Coverage Up to 15m² per litre
  • Drying Time 4-6 hours
  • Recoatable After 16-24 hours
  • Thinning White Spirit 10
  • Composition Solvent-based
Product Features
  • Fantastic Dulux Quality

Product Description

Dulux Trade Wood Primer is a good, general purpose solvent-based primer suitable for use on all types of soft and hard woods, inside and outside. Wood that is highly resinous should be primed with Dulux Trade Aluminium Wood Primer.

Application Description

Application : Brush only. For health and safety reasons related to all solvent-based paints, spray application is not recommended. STIR THOROUGHLY BEFORE USE. Treat any knots in wood with an appropriate knotting solution. After suitable surface preparation, apply 1 coat of Dulux Trade Wood Primer to all barewood and allow to dry. Finish with an appropriate Dulux Trade paint system.

Technical & Safety Documentation

Tips & Advice

  • 1. Preparing the Surfaces
    To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particuarly must be fully dry). See Dulux Trade Datasheet 201 for full information before use, available free on request by telephoning 0333 222 70 70 or visiting duluxtrade.co.uk. Before surface preparation read the Health & Safety information about old lead paints.
  • 2. Cleaning
    After use, remove as much paint as possible from brushes before cleaning with brush cleaner
  • 3. Storing
    Do not use or store in extremes of temperature and protect from frost
Fetching the data, plz wait..