Dulux Trade Anti Graffiti Primer

Select a colour for this paint

Quantity

Size Pack

About this product

Dulux Trade Anti Graffiti Primer is part 1 of a 2 part system comprising of a primer and finish. Dulux Trade Anti Graffiti primer provides excellent adhesion on difficult surfaces for Dulux Trade Emulsion overcoated with Dulux Trade Anti Graffiti Clear Coat. Dulux Trade Anti Graffiti Paint Clear Coat is a high performance water-based paint that is resistant to repeated washing, steam cleaning and

solvent cleaning. It can be used where graffiti is a problem or as a hygienic coating e.g. hospitals, industrial kitchens and food and drink processing industries.

Show more Show less

Datasheet & Documents

DT GB EN ANTI GRAFFITI PRIMER ACTIVATOR.pdf

CLP MSDS

DT GB EN ANTI GRAFFITI PRIMER ACTIVATOR.pdf

CLP MSDS

View
DT GB EN ANTI GRAFFITI PRIMER BASE.pdf

CLP MSDS

DT GB EN ANTI GRAFFITI PRIMER BASE.pdf

CLP MSDS

View
Dulux Trade Anti Graffiti Paint Primer tds.pdf

TDS

Dulux Trade Anti Graffiti Paint Primer tds.pdf

TDS

View

Download All

Key Benefits

Extra Durability
For use on bare or sealed surfaces
Interior & exterior use
Water-based

Technical Information

Touch dry	4-6 hours at 20º
Recoatable	Minimum 16 hours
Coverage	Up to 10m² per litre

Product Information

Composition

Water-based

Key Benefits

Extra Durability, For use on bare or sealed surfaces, Interior & exterior use, Water-based

Pack size

1L, 4L

Application Method

Mixing Ratio: Supplied in correct proportions. Add all of the Activator to the Base container and mix thoroughly for at least 5 minutes, until the product is smooth and even. Do not mix part units. Badly activated or incorrectly mixed materials will affect performance and may cause early failure or discolouration.
Recommended Systems: STIR THOROUGHLY BEFORE USE. Primer: 1 coat of Dulux Trade Anti Graffiti Primer. Finish: 2 coats of Dulux Trade Diamond Eggshell/Matt followed by 1-2 Coats of Dulux Trade Anti-Graffiti Clear Coat. NOTE: Do not apply over underbound coatings e.g. distemper or non cross-linked flexible coatings e.g. Acrylated Rubber, Chlorinated Rubber. It is recommended that a small test area is applied before treating the entire surface to ensure compatibility. Pot Life; 2 hours (depending on prevailing conditions).