Polycell Trade Deep Hole Polyfilla

Size
Paint Calculator
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Structural repair - drillable and accepts screws and nails
  • Fills holes up to 50mm deep in one application
  • No shrinking,cracking or sagging
  • Can be overpainted in 30 minutes
  • Plaster based - smooth and easy to sand
Product Features
  • Quick Drying
  • Will not shrink or crack
Technical Information
  • Drying Time 20 minutes
  • Recoatable 20 minutes

Product Description

Polycell Deep Hole Polyfilla is a two part plaster based filler that fills deep holes up to 50mm and dries to a structurally sound repair in just 20 minutes.

Application Description

Remove inner Part B from the main Part A container. Mix equal amounts of Parts A and B on a flat surface into a smooth even coloured paste. Do not prepare more than can be applied in 5-10 minutes, as this is the working life of the product. Press the filler into the repair with a filling knife and finish off by smoothing with a wet knife and leave to set. Sand down when fully dry and overpaint when used outside.

Technical & Safety Documentation

  • PT_GB_EN_DEEP_HOLE_POLYFILLA_COMPONENT_A.pdf
  • PT_GB_EN_DEEP_HOLE_POLYFILLA_COMPONENT_B.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    To get the best results make sure surfaces and cracks are free of loose material. Touch in nails and screw heads with a solvent-based paint.
  • 2. Cleaning
    After use, clean tools in warm water and store unused product in the original containers, replacing the membrane and securing the lid firmly.