Dulux Trade Line Marking Paint

A hard-wearing, single pack, acrylated rubber line marking paint for interior and exterior use
White
Only 1 Colour is Available
Size
Paint Calculator
This product is currently out of stock, please visit a store or other online retailers.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Excellent scuff resistance
  • High-build finish
  • Withstands repeated washing
  • Solvent-based
Technical Information
  • Finish Matt
  • Coverage Up to 10m² per litre
  • Drying Time 30 minutes
  • Recoatable 1 hour
  • Composition Solvent-based
Product Features
  • Fantastic Dulux Quality

Product Description

Dulux Trade Line Marking Paint is for interior and exterior use, marking areas such as car parks and demarcation zones on concrete and asphalt surfaces.

Application Description

Application: Brush or roller only. Do not spray. STIR THOROUGHLY BEFORE USE. After surface preparation, the normal recommendation is to apply 1 or 2 coats of Dulux Trade Line Marking Paint. Do not use in cold, damp conditions. A single coat at standard thickness is normally touch dry after 30 minutes and resistant to vehicular traffic after 2 hours. Recoat after 1 hour.

Technical & Safety Documentation

Download Adobe Reader

Tips & Advice

  • 1. Preparing the Surfaces
    Surfaces should be clean, sound and free from contaminants. Concrete - Power floated, granolithic and smooth surfaces should be roughened first to provide a good key for the paint. This can be done mechanically by abrading or blasting. These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance. New concrete must be allowed to cure thoroughly which can take up to 3 months. Tarmac - Due to the variability of asphalt, newly laid bitumen based surfaces (up to six months old) will need to be sealed with a thinned coat of Dulux Trade Vinyl Matt (add up to 1 part clean water to 5 parts paint), in order to prevent bleeding. It is recommended that a test patch be applied first when using newly laid bitumen. See Dulux Trade Datasheet 525 for full information before use available free on request by telephoning 0333 222 7070 or visiting duluxtrade.co.uk.
  • 2. Cleaning
    After use, remove as much paint as possible from brushes before cleaning with brush cleaner
  • 3. Storing
    Do not use or store in extremes of temperature

How much paint do I need?

Measure your dimensions

Do you know the area?

Enter your measurements

Paintable area

{{!-- The value will be injected with JavaScript --}}
{{!-- The value will be injected with JavaScript --}}
m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

{{!-- This value will be injected with JavaScript --}}

Amount needed:

{{!-- This value will be injected with JavaScript --}}

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator

Add a new job

  • Kitchen
  • Bedroom
  • Living Room

Add a new job

  • Kitchen
  • Bedroom
  • Living Room

Edit job

Delete job

Delete job

Are you sure? All notes, photos and saved items will be deleted.

Save Color

Save to My Workspace

Add to job

Dulux Trade Line Marking Paint

Save to My Workspace

Sorry, we couldn't find any results
Fetching the data, plz wait..