Application: Airless spray only. A test application is recommended to determine the tip size and pressure required to provide acceptable application and dry fog properties. A reduction in tip size will give improved dry fog. The use of new tips is recommended for best results. For normal use, thinning is not usually required, but if necessary add up to 10% clean water.
STIR THOROUGHLY BEFORE USE. The normal finishing process is to apply 1 coat of Dulux Trade Dry Fall Eggshell over a suitably prepared primed surface. * At 25°C and 50% relative humidity, recoat time is 2 hours and overspray dries to a dust on falling a minimum of 10ft (3.3m). Low temperature and high humidity will increase drying time and dry fall-out distances. Do not use when the temperature is below 10°C.