Hammerite Underbody Seal Schutz

Size
Paint Calculator
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Protects against stones,water and salt
  • Proven corrosion resistance
  • Remains flexible - will not crack or peel
  • Non drip super smooth application
  • Free from gritty and abrasive particles
  • Prolongs your vehicles life
Technical characteristics
Technical Information
  • Finish Matt
  • Coverage 4-5m2per litre
  • Drying Time n/a
  • Recoatable n/a
  • Composition Solvent-based
Product Features
  • Non-drip super smooth application
  • Free from gritty and abrasive particles

Product Description

Hammerite Underbody Seal gives heavy duty protection for underbody,wheel arches and other high impact areas

Application Description

Do not apply to sump, gearbox, exhaust system, cables or any mechanical parts.Check that spraying equipment is clean and free from blockages.Shake well before use.Spray at a pressure of 5-6 bar (70/90psi) at a distance of 30-50cm (12-20 lnches).Allow to dry overnight.To remove Hammerite Underbody Seal from paintwork, wipe off immediately with white spirit.



Technical & Safety Documentation

Flame, Health hazard, Exclamation mark, Environment Danger Contains Naphtha (petroleum), hydrodesulfurized heavy Hydrocarbons,C9-C12,n-alkanes,isoalkanes,cyclic,aromatics(2-25%)Flammable liquid and vapour. May cause drowsiness or dizziness. Causes damage to organs through prolonged or repeated exposure. Toxic to aquatic life with long lasting effects.Keep out of reach of children. If medical advice is needed, have product container or label at hand.Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Do not breathe vapour.IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell.Keep cool.Dispose of contents and container in accordance with all local, regional, national or international regulations.Repeated exposure may cause skin dryness or cracking.

System information

Do not apply to sump, gearbox, exhaust system, cables or any mechanical parts.Check that spraying equipment is clean and free from blockages.Shake well before use.Spray at a pressure of 5-6 bar (70/90psi) at a distance of 30-50cm (12-20).Allow to dry overnight.To remove Hammerite Underbody Seal from paintwork, wipe off immediately with white spirit.



Tips & Advice

  • 1. Preparing the Surfaces
    Remove heavy deposits of dirt, grease and oil.Wire brush-off loose rust and paint.Ensure surface is clean and dry
  • 2. Cleaning
    To remove Hammerite Underbody Seal from paintwork, wipe off immediately with white spirit