Hammerite Underbody Seal Aerosol

Size
Paint Calculator
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Protects against stones, water and salt
  • Proven corrosion resistance
  • Remains flexible - will not crack or peel
  • Non drip super smooth application
  • Free from gritty and abrasive particles
  • Prolongs your vehicles life
Technical characteristics
Technical Information
  • Finish Matt
  • Coverage 600ml covers 1m2
  • Drying Time 1-2 hours
  • Recoatable 1-2 hours
  • Composition Solvent-based
Product Features
  • Non-drip super smooth application
  • Free from gritty and abrasive particles

Product Description

Hammerite Underbody Seal gives heavy duty protection for underbody,wheel arches and other high impact areas

Application Description

Do not apply to sump, gearbox, exhaust system, cables or any mechanical parts.Spray from a distance of 25cm in a side to side motion, keeping the can in an upright position.Apply a minimum of 2 coats, allowing at least 1-2 hours between coats.To prevent blockages, turn can upside down and spray for 2 seconds between coats and after use.Allow to dry overnight.To remove Hammerite Underbody Seal from paintwork, wipe off immediately with white spirit.






Technical & Safety Documentation

Flame, Health hazard, Exclamation mark, Environment Danger Contains Hydrocarbons,C9-C12,n-alkanes,isoalkanes,cyclic,aromatics(2-25%)Extremely flammable aerosol. Pressurized container: may burst if heated. May cause drowsiness or dizziness. Causes damage to organs through prolonged or repeated exposure. Toxic to aquatic life with long lasting effects.Keep out of reach of children. If medical advice is needed, have product container or label at hand.Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not breathe dust or mist. Do not pierce or burn, even after use.IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell.Protect from sunlight. Do not expose to temperatures exceeding 50 degrees C/122 degrees F.Dispose of contents and container in accordance with all local, regional, national or international regulations.
  • HM_GB_EN_UNDER-BODY_SEAL_AEROSOL.pdf

System information

Do not apply to sump, gearbox, exhaust system, cables or any mechanical parts.Spray from a distance of 25cm in a side to side motion, keeping the can in an upright position.Apply a minimum of 2 coats, allowing at least 1-2 hours between coats.To prevent blockages, turn can upside down and spray for 2 seconds between coats and after use.Allow to dry overnight.To remove Hammerite Underbody Seal from paintwork, wipe off immediately with white spirit.






Tips & Advice

  • 1. Preparing the Surfaces
    Remove heavy deposits of dirt, grease and oil.Wire brush-off loose rust and paint.Ensure surface is clean and dry. Shake the can vigorously for at least 3 minutes after hearing the agitator ball
  • 2. Cleaning
    To remove Hammerite Underbody Seal from paintwork, wipe off immediately with white spirit