Hammerite Stonechip Shield Schutz

Hammerite-Ultimate metal protection.
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Tough and durable coating
  • Protects against stones, salt, damp and rust
  • Remains flexible, will not crack or peel
  • Easy to apply - non drip formulation
  • Ideal for sills,spoilers and lower body panels
  • Over-paintable with most top coats
  • Solvent based
Technical Information
  • Finish Matt
  • Coverage 4-5m2per litre
  • Drying Time 2-3 hours
  • Recoatable 3-5 hours
  • Composition Solvent-based
Product Features
  • Protects against stones, salt, damp and rust
  • Non-drip formulation

Product Description

Hammerite Stonechip Shield protects your vehicle sills and lower body panels against stonechip damage

Application Description

Shake can well before use. Spray at a pressure of 60-80psi (4-6Bar) at a distance of 30-50cm (12-20inches). Allow 3-5 hours before overpainting with topcoat.

Technical & Safety Documentation

Flame, Exclamation mark Warning Contains xylene Flammable liquid and vapour. Causes serious eye irritation. Causes skin irritation. May cause respiratory irritation.Keep out of reach of children. If medical advice is needed, have product container or label at hand.Wear protective gloves. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not get in eyes, on skin, or on clothing.IF INHALED- Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell.Keep cool.Dispose of contents and container in accordance with all local, regional, national or international regulations.

Colour Range

Hammerite Colours

System information

Shake can well before use. Spray at a pressure of 60-80psi (4-6Bar) at a distance of 30-50cm (12-20inches). Allow 3-5 hours before overpainting with topcoat.

Tips & Advice

  • 1. Preparing the Surfaces
    Ensure the surface is clean and dry. Remove loose rust and paint. Abrade surface. Ensure the spraying equipment is clean and free from blockages. Mask off the areas not to be sprayed
  • 2. Cleaning
    After use, remove as much paint as possible from equipment before cleaning with Hammerite Brush Cleaner & Thinners
Fetching the data, plz wait..