Hammerite Radiator Paint Gloss

Size
Paint Calculator
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • For domestic water - filled radiators and pipes
  • Resists yellowing
  • Prevents rust
  • Easy to use
  • Low odour
  • Solvent based
Technical characteristics
Technical Information
  • Finish Gloss
  • Coverage 7m2per litre
  • Drying Time 4-6 hours
  • Recoatable 16 hours
Product Features
  • Heat resistant
  • Provides a tough long lasting finish

Product Description

Hammerite Radiator Paint is specially formulated to provide a heat resistant, brilliant white, gloss finish on domestic radiators and hot water pipes.Provides a tough long lasting finish

Application Description

Stir thoroughly before use. Apply 1 or 2 coats. For best results apply 2 coats. Allow 16 hours between coats. After application leave the radiator turned off for a minimum of 12 hours. Rooms should be well ventilated for 12 hours after the heating is turned on to help remove all paint odours.

Technical & Safety Documentation

Flame, Exclamation mark Warning Contains Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, less than 2% aromaticsFlammable liquid and vapour. May cause drowsiness or dizziness.Keep out of reach of children. If medical advice is needed, have product container or label at hand.Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Do not get in eyes, on skin, or on clothing.IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell.Keep cool.Dispose of contents and c ontainer in accordance with all local, regional, national or international regulations.Contains phthalic anhydride and 2-butanone oxime. May produce an allergic reaction.Repeated exposure may cause skin dryness or cracking.
  • HM_GB_EN_RADIATOR_PAINT_GLOSS.pdf

System information

Stir thoroughly before use. Apply 1 or 2 coats. For best results apply 2 coats. Allow 16 hours between coats. After application leave the radiator turned off for a minimum of 12 hours. Rooms should be well ventilated for 12 hours after the heating is turned on to help remove all paint odours.

Tips & Advice

  • 1. Preparing the Surfaces
    All surfaces must be clean, dry and free from rust, flaking paint, dirt, dust and grease. Rub down all painted surfaces with abrasive paper. Radiators must be turned off and only painted when cold
  • 2. Cleaning
    After use remove as much paint as possible from brushes before cleaning with Hammerite Brush Cleaner & Thinners or white spirit