Hammerite Radiator Enamel Satin Aerosol

Size
Paint Calculator
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Heat resistant protection
  • Hard wearing
  • Resists yellowing
  • Solvent based
Technical characteristics
Technical Information
  • Finish Satin
  • Coverage 0.5m2per litre
  • Drying Time 1-2 hours
  • Recoatable 15 minutes
  • Composition Solvent-based
Product Features
  • Tough & durable
  • Prevents yellowing

Product Description

Hammerite Radiator Enamel is specially formulated to provide a heat resistant, brilliant white finish on domestic water filled household radiators and hot water pipes.Provides a tough long lasting finish

Application Description

Store aerosol at room temperature for 2 hours prior to use. Shake can vigorously, in a vertical motion, until the agitator ball is heard and then for a further 3 minutes. Apply light even coats, from a distance of approximately 15cm (6"), and keep the aerosol moving. Do not concentrate spray on one spot. When touch dry (15 minutes) apply a further 2-3 coats, allowing 30 minutes between coats. Do not overspray as sagging may occur if excessive paint is applied. Between coats invert can and spray for 2 seconds to avoid blockages.

Technical & Safety Documentation

Flame, Exclamation mark Danger Contains acetone Extremely flammable aerosol. Pressurized container: may burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness.Keep out of reach of children. If medical advice is needed, have product container or label at hand.Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not get in eyes, on skin, or on clothing. Do not pierce or burn, even after use.IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell.Protect from sunlight. Do not expose to temperatures exceeding 50 degrees C/122 degrees F.Dispose of contents and container in accordance with all local, regional, national or international regulations.Contains phthalic anhydride and 2-butanone oxime. May produce an allergic reaction.Repeated exposure may cause skin dryness or cracking.
  • HM_GB_EN_RADIATOR_ENAMEL_SATIN_AEROSOL.pdf

System information

Store aerosol at room temperature for 2 hours prior to use. Shake can vigorously, in a vertical motion, until the agitator ball is heard and then for a further 3 minutes. Apply light even coats, from a distance of approximately 15cm (6"), and keep the aerosol moving. Do not concentrate spray on one spot. When touch dry (15 minutes) apply a further 2-3 coats, allowing 30 minutes between coats. Do not overspray as sagging may occur if excessive paint is applied. Between coats invert can and spray for 2 seconds to avoid blockages.

Tips & Advice

  • 1. Preparing the Surfaces
    All surfaces must be clean, dry and free from rust, flaking paint, dirt, dust and grease. Rub down all painted surfaces with abrasive paper. Radiators must be turned off and only painted when cold. Mask off the surrounding area to protect from overspray