Hammerite No 1 Rust Beater Aerosol

Size
Paint Calculator
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Corrosion resistant
  • Compatible with most topcoats
  • Can be applied direct to rust
  • Anti-corrosive primer for ferrous metals
  • Solvent based
Product Features
  • Stabilises rust
  • Easy to apply
Technical Information
  • Finish Matt
  • Coverage 400ml covers up to 0.5 sq m
  • Drying Time 30 minutes
  • Recoatable 30 minutes
  • Composition Solvent-based

Product Description

Hammerite No.1 Rustbeater provides a high build finish to heavily pitted areas of rust and prevents new rust forming

Application Description

Shake the can vigorously using a vertical motion until the agitator ball is heard, then for a further 3 minutes.Shake the can vigorously using a vertical motion until the agitator ball is heard, then for a further 3 minutes.When touch dry (15 minutes) apply a further 2-3 coats, allowing 30 minutes between coats. Do not overspray or sagging might occur.A topcoat may be applied after a minimum of 4 hours. For best results allow 24 hours. Between coats invert can and spray for 2 seconds to avoid blockages.

Technical & Safety Documentation

Flame, Exclamation mark Danger Contains Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, less than 2% aromatics HYDROCARBONS, C6-C7, N-ALKANES, ISOALKANES, CYCLICS,less than 5% N-HEXANEExtremely flammable aerosol. Pressurized container: may burst if heated. Causes skin irritation. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects.Keep out of reach of children. If medical advice is needed, have product container or label at hand.Wear protective gloves. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not get in eyes, on skin, or on clothing. Do not pierce or burn, even after use.IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell.Protect from sunlight. Do not expose to temperatures exceeding 50 degrees C/122 degrees F.Dispose of contents and container in accordance with all local, regional, national or international regulations.Contains 2-butanone oxime. May produce an allergic reaction.
  • hm_gb_en_no1_rust_beater_aerosol.pdf

Colour Range

Weathershield 420 Fandeck

System information

Shake the can vigorously using a vertical motion until the agitator ball is heard, then for a further 3 minutes.Shake the can vigorously using a vertical motion until the agitator ball is heard, then for a further 3 minutes.When touch dry (15 minutes) apply a further 2-3 coats, allowing 30 minutes between coats.
Do not overspray or sagging might occur.A topcoat may be applied after a minimum of 4 hours. For best results allow 24 hours.
Between coats invert can and spray for 2 seconds to avoid blockages.

Tips & Advice

  • 1. Preparing the Surfaces
    Remove loose rust, scale and paint by wire brushing or rubbing down with coarse abrasive paper. Abrade clean steel with emery paper to provide a key. Degrease where necessary with white spirit, rinse with clean water and allow time to dry
  • 2. Cleaning
    Between coats invert can and spray for 2 seconds to avoid blockages