Hammerite Kurust

Size
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Can be topcoated after only 3 hours
  • No primer or undercoat required
  • Simple to apply - no need to rinse off
  • Converts iron oxide to stable iron complexes.
Technical characteristics
Technical Information
  • Finish Matt
  • Coverage 20-25m2per litre
  • Drying Time 3 hours
  • Recoatable 3 hours
Product Features
  • Surface can be topcoated after only 3 hours
  • No need for primer or undercoat

Product Description

Kurust ransforms rust to a sound surface in 15 minutes. Ideal for small areas of rust, stone chips and scratches.

Application Description

Pencil brush - Shake container well.Using the brush in the cap apply directly onto the rusty area, working well into any pitted areas, corners and edges. 100/250ml - Shake container well and pour required amount into a plastic container. By brush: apply direct to rusty area, working well into heavily pitted areas, corners and edges. Avoid coating onto painted areas. Hammerite Kurust will turn blue/black when reacting with rust. If it does not change colour in 1 hour re-apply. Apply topcoat after 3 hours. Do not replace unused Kurust back into the original container.

Technical & Safety Documentation

Keep out of reach of children. If medical advice is needed, have product container or label at hand. Do not get in eyes, on skin or on clothing.Call a POISON CENTER or doctor if you feel unwell. Dispose of contents and container in accordance with all local, regional, national or international regulations.
  • HM_GB_EN_KURUST.pdf

System information

Pencil brush - Shake container well.Using the brush in the cap apply directly onto the rusty area, working well into any pitted areas, corners and edges. 100/250ml - Shake container well and pour required amount into a plastic container. By brush: apply direct to rusty area, working well into heavily pitted areas, corners and edges. Avoid coating onto painted areas. Hammerite Kurust will turn blue/black when reacting with rust. If it does not change colour in 1 hour re-apply. Apply topcoat after 3 hours. Do not replace unused Kurust back into the original container.

Tips & Advice

  • 1. Preparing the Surfaces
    Clean surface by removing all loose paint and rust, dirt, grease and salt. Rinse with clean water and allow time to dry
  • 2. Cleaning
    Clean container with water. Hammerite Kurust should be stored in a dry, well-ventilated area. Protect from frost and direct sunlight