Dulux Trade High Performance Floor Paint

Select a colour for this paint

Quantity

Size Pack

About this product

Dulux Trade High Performance Floor Paint is a water-based two-pack epoxy floor paint, suitable for high traffic areas. Its hard wearing properties make it suitable for both interior and exterior use. It offers excellent abrasion resistance on concrete and metal floors, drying to a highly durable mid-sheen finish.

Datasheet & Documents

DT 533 - High Performance Floor Paint.pdf

TDS

DT 533 - High Performance Floor Paint.pdf

TDS
DT GB EN HIGH PERFORMANCE FLOOR PAINT ACTIVATOR.pdf

CLP MSDS

DT GB EN HIGH PERFORMANCE FLOOR PAINT ACTIVATOR ...

CLP MSDS
DT GB EN HIGH PERFORMANCE FLOOR PAINT BASE.pdf

CLP MSDS

DT GB EN HIGH PERFORMANCE FLOOR PAINT BASE.pdf

CLP MSDS

Download All

Key Benefits

Optimum performance
Highly durable, 2 pack system
For use in heavy commercial environments
Water-based

Technical Information

Touch dry:	4-6 hours
Recoatable:	16-24 hours
Coverage:	Up to 6m² per litre

About this product

Datasheet & Documents

DT 533 - High Performance Floor Paint.pdf

TDS

DT 533 - High Performance Floor Pain ...

TDS
DT GB EN HIGH PERFORMANCE FLOOR PAINT ACTIVATOR.pdf

CLP MSDS

DT GB EN HIGH PERFORMANCE FLOOR PAIN ...

CLP MSDS
DT GB EN HIGH PERFORMANCE FLOOR PAINT BASE.pdf

CLP MSDS

DT GB EN HIGH PERFORMANCE FLOOR PAIN ...

CLP MSDS

Download All

Product Information

Composition

Water-based

Key Benefits

Optimum performance, Highly durable, 2 pack system, For use in heavy commercial environments, Water-based

Colour Range

BS4800, CUPRINOL Digital Default Colors (Web Only), Dulux Trade Professional Colour Guide

Pack size

1.78L, 3.22L

Application Method

Application: Brush or roller only, do not spray. Mixing Ratio: Supplied in correct proportions. Add all of this Base to the Activator container and mix thoroughly for at least 5 minutes using a jiffy paddle in an electric drill, until the product is smooth and even. Do not mix part units. Badly activated or incorrectly mixed materials will affect performance and may cause early failure or discolouration. The mixed product should be allowed to stand for 5 minutes before application commences. Once started, application should continue without a break, cutting in where necessary as the application proceeds.
Pot Life: Up to 1 hour at 15°C. Up to 45 minutes at 23°C. Poor adhesion will result if product is thinned and used after pot life times.