Polycell Trade Easy Sand Interior Filler

Interior filler which sands down easily and gives a perfect finish for repairs to most indoor building materials.
Size
Paint Calculator
This product is currently out of stock, please visit a store or other online retailers.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Mixes to a smooth consistency and is easy to sand
  • Remains workable for up to 1.5 hours depending on temperature, humidity and depth of area filled
  • Low shrinkage
  • Suitable for repairs to most indoor building materials including plaster, plasterboard,wood, brick and stone. Use it to fill cracks and holes in walls and ceilings, around doors, window frames and skirting’s.
Technical Information
  • Drying Time 3.5 hour
  • Recoatable 3.5 hour
Product Features
  • Easy sand

Product Description

Polycell Easy Sand Interior filler sands down easily and gives a perfect finish for repairs to most indoor building materials.

Application Description

Mixing - When mixing by volume add 2 parts Polycell Trade Easy Sand Interior Filler to 1 part water. Mix thoroughly to form a smooth paste, adding more water or powder as necessary. Approximately 3L of water is required to mix a full 5 Kg bag and approximately 6L of water is required to mix a full 10 Kg bag. NB: Always use clean tools when mixing a new batch of filler.
Application - Apply with a filling knife and smooth off with a wet blade. Setting occurs in approximately 3.5 hours depending on temperature, humidity and depth of area filled.
Completion- If required, rub down with abrasive paper when fully dry. Can be over painted when dry. Clean tools and utensils in warm water immediately after use. Dependant on paint type visibility can increase. For best results to reduce visibility of filler through paint, use two top coats.

Technical & Safety Documentation

Tips & Advice

  • 1. Preparing the Surfaces
    Remove loose or flaking material. Make sure the surface is clean (no dirt or grease) and dry. Cover nail and screw heads with an oil based paint
    prior to application to prevent rusting. Highly absorbent and/or powdery surfaces need to be sealed in advance.
  • 2. Cleaning
    Clean tools and utensils in warm water immediately after use.
Fetching the data, plz wait..