Dulux Trade Weathershield Stabilising Primer

Size
Paint Calculator
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Seals and stabilises
  • For powdery masonry surfaces
  • Ready for use
  • Solvent-based
Product Features
  • 7 Years Warranty
Technical Information
  • Finish Matt
  • Coverage Up to 10m² per litre
  • Drying Time 2-4 hours dependent on temperature and humidity
  • Recoatable 16-24 hours
  • Thinning White Spirit
  • Composition Solvent-based

Product Description

Dulux Trade Weathershield Stabilising Primer is a solvent-based primer specially formulated to seal unstable areas which remain powdery and chalky after the surface has been thoroughly prepared for painting with Weathershield Masonry Paints.

Application Description

Application: Brush or roller only. For Health and Safety reasons related to all solvent-based paints, spray is not recommended. SHAKE CONTAINER VIGOROUSLY BEFORE USE. When the surface has been fully prepared any areas that remain powdery and chalky should be sealed with a coat of Weathershield Stabilising Primer. When fully dry apply 2 coats of the selected Weathershield Masonry Paint. Weathershield Stabilising Primer should not be used as a general purpose sealer on normal or sound surfaces (i.e not powdery and chalky after the surface has been thoroughly prepared). New or sound bare surfaces should only be sealed with a thinned first coat of the masonry paint itself.

Technical & Safety Documentation

  • Dulux Trade Weathershield Stabilising Primer tds.pdf
  • DT_GB_EN_WEATHERSHIELD_STABILISING_PRIMER.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    To get the best results, ensure surfaces to be sealed are sound, clean and dry. See Dulux Trade Datasheet 304 for full information before use, available free on request by telephoning 0333 222 70 70 or visiting www.duluxtrade.co.uk. Before surface preparation, read the Health & Safety information about old lead paints.
  • 2. Cleaning
    After use, remove as much product as possible from brushes before cleaning with brush cleaner
  • 3. Storing
    Do not use or store in extremes of temperature and protect from frost