Products
Products
Dulux Trade Weathershield Smooth Masonry Paint

Dulux Trade Weathershield Smooth Masonry Paint

A quick drying water-based exterior masonry pain providing a smooth finish

Nordic Hills

Change Colour

Size

2.5L 5L

Quantity

Paint Calculator

This product is not for online sale and can only be purchased from selected stores.

Find a Store

Your Measurements:

Amount Needed:

For the best result we recommend to use {coatAmount} for {productTitle}

Key benefits

Shower resistant within 30 minutes
Excellent opacity
Water-based
Superior protection from mold & algae
Anti-fade Technology for longer lasting colour
15 years protection (BBA approved)

Technical Information

Finish Smooth
Coverage Up to 16m² per litre
Drying Time 30 minutes
Recoatable After 2-4 hours dependent on temperature and humidity
Thinning Water 5
Composition Water-based

Product Features

Fantastic Dulux Quality

Product Description

Dulux Trade Weathershield Smooth Masonry Paint is a high-quality decorative coating for exterior walls. It is formulated for professional use; being easy to apply and has excellent opacity. The 2021 formulation includes a new and improved active ingredient to inhibit the growth of mould & algae within the paint film and helps it stay cleaner for longer. The addition of Anti-fade technology delivers longer lasting colour.

Application Description

Brush, roller or airless spray. Do not use in extremes of temperatures (below 7ºC) or during rain, fog or relative humidity above 80%.

Technical & Safety Documentation

Download Adobe Reader

Colour Range

True Joy™ - Colour of the Year 2025, Weathershield Masonry Palette, Colour Futures 2020, Armstead Colour Guide, Sweet Embrace™ - Dulux Colour of the Year 2024, Colour Futures 2023, Colour Futures 2022, Colour Palette Fandeck, Dulux Trade Pro Colour Guide, Heritage, Dulux Trade Commercial Colour Guide, Colour Futures 2021, National Colour Wall, BS4800, RAL Classic, Weathershield Professional Colour Guide Masonry

Tips & Advice

1. Preparing the Surfaces

"To get the best results with Weathershield Smooth Masonry Paint make sure surfaces to be painted are sound, clean and dry (new surfaces particularly fully dry). Wash down previously painted surfaces with a detergent solution to remove all dirt, grease or chalking paint where practicable. Rinse off with clean water and allow to dry. Carefully scrape back to a firm edge all areas of poorly adhering or defective coatings and rub down thoroughly to ‘key and feather’ broken edges of existing coatings. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.

Treat any areas affected by mould, lichens and algae with Dulux Trade Weathershield Fungicidal Wash***. Make good minor defects with an appropriate Polycell filler. Use a sand and cement mix for larger holes and cracks. Allow to dry.

New or sound bare surfaces should be sealed with a thinned first coat of Weathershield Smooth Masonry Paint (add up to 1 part clean water t
2. Cleaning

Remove as much paint as possible from the equipment before cleaning with water
3. Storing

Do not use or store in extremes of temperature and protect from frost

How much paint do I need?

Measure your dimensions

Do you know the area?

No Yes

Enter your measurements

Meters Centimeters

Paintable area

Width *

Height *

Area *

m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

Amount needed:

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator