Dulux Trade Weathershield Masonry Gloss

A quick-drying, high gloss quality emulsion ideal for use on exterior masonry.
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • 10 year all weather protection
  • High gloss finish
  • Coverage up to 14m² per litre
  • Water-based
Technical Information
  • Finish Gloss
  • Coverage Up to 14m² per litre
  • Drying Time 2 hours
  • Recoatable 4 hours
  • Thinning Water 5
Product Features
  • Fantastic Dulux Quality
Weathershield Smooth Masonry Gloss is a quick-drying, high gloss quality emulsion ideal for use on exterior masonry. Its smooth gloss formulation discourages dirt retention whilst the added fungicide inhibits mould growth on the paint film. Weathershield Masonry Gloss can be applied to surfaces previously painted with masonry paint, including solvent-based finishes. It is particularly suitable for use in changeable weather conditions and is shower resistant in 30 minutes after application.
Application: Brush, roller or spray. STIR THOROUGHLY BEFORE USE. Seal new or bare surfaces with a thinned first coat of Weathershield Masonry Gloss (up to 1 part clean water to 5 parts paint). The normal finishing process is 2 full coats of Weathershield Masonry Gloss, but on previously painted surfaces in good condition, where similar colours are used, 1 coat may be sufficient.
  • 1. Preparing the Surfaces
    To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces must be fully dry). See Dulux Trade Datasheet 513 for full information before use available at www.duluxtrade.co.uk or by telephoning 0333 222 70 70. Before surface preparation read the Health & Safety information about old lead paints.
  • 2. After use
    Cleaning After Final Use: Clean brushes and rollers immediately after final use to reuse them for future projects, saving you money and reducing waste. Cleaning Steps: 1. Remove Excess Paint: Scrape off leftover paint into a container for reuse. 2. Wash with Warm, Soapy Water: Clean brushes and rollers with warm soapy water in a sealed container like a bucket or tub. 3. Rinse Thoroughly: Rinse out all soap and paint residues into the same container. 4. Dry Naturally: Let tools air-dry and store in a dry, dust-free area. Dispose Responsibly: Settle Solids: Let paint solids settle at the bottom of the container. Pour off clear water for reuse or disposal. Disposal: Let remaining paint solids dry fully before disposing of them as solid waste. Do not flush paint down the drain, including when cleaning painting tools Pro Tip: Watch this cleaning guide from the British Coatings Federation and Dulux Connect contractor Bagnall’s: https://coatings.org.uk/general/custom.asp?page=HowToCleanPaintbrushes
  • 3. Storing
    Storing & Responsible Disposal Do not use or store paint in extreme temperatures and protect from damp & frost. Reuse, Recycle, or Donate- Whenever possible, reuse, recycle, or donate leftover paint. Find local services at recyclenow.com. If no Community RePaint service is nearby, consider advertising paint locally—many good causes need it to brighten community spaces. Dispose Responsibly- Never pour paint or wastewater down drains or sinks. Follow instructions at recyclenow.com to recycle empty packs. Reuse Roller Cages- Remove sleeves and store cages in a dry, dust-free place. Dispose of Unusable brushes and Sleeves- If brushes or sleeves cannot be cleaned or reused, dispose of them in general waste to avoid recycling issues. Paint Wash Water- Collect wash water in a container; don’t pour it into drains or on the ground. Let solids settle, pour off clear water for reuse or disposal, and let solids dry before disposing as solid waste. Do not flush paint down drains, including when cleaning tools.
Fetching the data, plz wait..