Dulux Trade Weathershield Exterior Flexible Filler

An exterior filler for filling in open joints, splits and minor cracks in wood and masonry surfaces
Size
This product is not for online sale and can only be purchased from selected stores.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Superior flexibility
  • Resists shrinking & cracking
  • Easy to sand
  • Water-based
Technical Information
  • Finish Matt
  • Coverage N/A
  • Drying Time 2 hours depending on depth of the repair
  • Composition Water-based
Product Features
  • Fantastic Dulux Quality
Dulux Trade Weathershield Exterior Flexible Filler is a lightweight, easy to use filler, specially formulated for use on wood and masonry with the Weathershield paint systems. It has superior flexibility and adhesion, giving it excellent resistance to shrinkage and cracking. When dry, Weathershield Exterior Flexible Filler is easy to rub down smooth, ready for painting.
Application: Filling knife or other suitable tool. STIR THOROUGHLY BEFORE USE. This product does not require thinning, but may be made easier to use by adding a few drops of clean water and then mixing to a stiff paste. Dampen the area to be made good, using a clean damp sponge and then press the filler firmly into the defect using a clean filling knife. Leave a small excess of the filler to allow for any sinkage and rub down smooth when dry. Drying time is variable depending on the depth of repair and will take significantly longer in cold, damp conditions, but allow at least overnight before rubbing down.
  • 1. Preparing the Surfaces
    For the best results, ensure surfaces are clean, dry and free from all defective or poorly adhering material. See Dulux Trade Datasheet 802 for full information before use, available at www.duluxtrade.co.uk or by telephoning 0333 222 70 70.
  • 2. After use
    Cleaning After Final Use: Clean equipment immediately after final use to reuse them for future projects, saving you money and reducing waste. Cleaning Steps: 1. Remove Excess Filler: Scrape off leftover filler into a container for reuse. 2. Wash with Warm, Soapy Water: Clean equipment with warm soapy water in a sealed container like a bucket or tub. 3. Rinse Thoroughly: Rinse out all soap and filler residues into the same container. 4. Dry Naturally: Let tools air-dry and store in a dry, dust-free area. Dispose Responsibly: Settle Solids: Let paint solids settle at the bottom of the container. Pour off clear water for reuse or disposal. Disposal: Let remaining solids dry fully before disposing of them as solid waste. Do not flush paint down the drain, including when cleaning painting tools Pro Tip: Watch this cleaning guide from the British Coatings Federation and Dulux Connect contractor Bagnall’s: https://coatings.org.uk/general/custom.asp?page=HowToCleanPaintbrushes
  • 3. Storing
    Storing & Responsible Disposal Do not use or store paint in extreme temperatures and protect from damp & frost. Reuse, Recycle, or Donate- Whenever possible, reuse, recycle, or donate leftover paint. Find local services at recyclenow.com. If no Community RePaint service is nearby, consider advertising paint locally—many good causes need it to brighten community spaces. Dispose Responsibly- Never pour paint or wastewater down drains or sinks. Follow instructions at recyclenow.com to recycle empty packs. Reuse Roller Cages- Remove sleeves and store cages in a dry, dust-free place. Dispose of Unusable brushes and Sleeves- If brushes or sleeves cannot be cleaned or reused, dispose of them in general waste to avoid recycling issues. Paint Wash Water- Collect wash water in a container; don’t pour it into drains or on the ground. Let solids settle, pour off clear water for reuse or disposal, and let solids dry before disposing as solid waste. Do not flush paint down drains, including when cleaning tools.
Fetching the data, plz wait..