Products
Products
Dulux Trade Vinyl Matt Light & Space

Dulux Trade Vinyl Matt Light & Space

A Vinyl Matt emulsion with revolutionary Lumitec technology making even the smallest rooms look and feel spacious

OCEAN RIPPLE

Change Colour

Size

Quantity

Paint Calculator

This product is not for online sale and can only be purchased from selected stores.

Find a Store

Your Measurements:

Amount Needed:

For the best result we recommend to use {coatAmount} for {productTitle}

Key benefits

Coverage up to 17m² per litre
Water-based
Light reflective, reflecting up to twice as much light

Technical Information

Finish Matt
Coverage Up to 17m² per litre
Drying Time Dependent on temperature and humidity
Recoatable 2-4 hours
Thinning Sealing new or bare surfaces- Add up to 1 part clean water to 5 parts paint. Normal use (not to be exceeded)- Add up to 1 part clean water to 10 parts paint. Airless spray application- Add up to 1 part clean water to 10 parts paint.
Composition Water-based

Product Features

Fantastic Dulux Quality

Product Description

Dulux Trade Vinyl Matt Light & Space uses revolutionary Lumitec technology that helps reflect up to twice as much light around the room, making even the smallest rooms look and feel more spacious compared to our conventional emulsion paints with a similar hue (colour family) and chroma (intensity of colour).
* The light reflectance value is always greater than our conventional emulsion paints but may not reflect twice as much light in every case, depending on the colour chosen.

Application Description

Application : Brush, roller or airless spray. STIR THOROUGHLY BEFORE USE. Seal new or bare surfaces with a thinned first coat of Dulux Trade Vinyl Matt (up to 1 part clean water to 5 parts paint). The normal finishing process is 2 full coats of Dulux Trade Vinyl Matt Light & Space but on previously painted surfaces in good condition where similar colours are used, 1 coat may be sufficient. For best colour consistency, purchase sufficient tinted paint for each job, including touch-in, at one time from the same source.
Airless Spray: For best results use a 515 or 517 Low Pressure tip @ 1300 -1700 psi (89 – 117 bar).
Alternatively use a 515 or 517 tip @ 2200 – 2600 psi (152 – 179 bar).
Please note that the above recommendations are intended as a guideline only and some adjustments may need to be made to accommodate equipment type & age, substrate type and individual site & atmospheric conditions.

Technical & Safety Documentation

Download Adobe Reader

Colour Range

Dulux Trade Pro Colour Guide, Light & Space Colours

Tips & Advice

1. Preparing the Surfaces

To get the best results with Dulux Trade Vinyl Matt Light & Space, make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). Remove all loose and defective paint. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead. See Dulux Trade Datasheet 536 for full information before use, available free on request by telephoning 0333 222 70 70 or visiting duluxtrade.co.uk.
2. Cleaning

After use, remove as much paint as possible from equipment before cleaning with water
3. Storing

Do not use or store in extremes of temperature and protect from frost

How much paint do I need?

Measure your dimensions

Do you know the area?

No Yes

Enter your measurements

Meters Centimeters

Paintable area

Width *

Height *

Area *

m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

Amount needed:

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator