Dulux Trade Ultra Matt

A dead matt emulsion formulated to be anti-flashing and provide a non-reflective finish at all angles, perfect for ceilings. It has excellent touching-in properties, providing near invisible touch-up for areas in critical lighting.
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Water-based
  • Excellent touching in priorities
  • Anti-flashing
  • Dead Matt Finish, Ideal for Ceilings in Critical Lighting
Technical Information
  • Finish Matt
  • Coverage Up to 16m² per litre
  • Drying Time Dependent on temperature and humidity
  • Recoatable 4 hours
  • Thinning Thinning not required.
  • Composition Water-based
Product Features
  • Fantastic Dulux Quality
Ideal for ceilings, Dulux Trade Ultra Matt has been formulated to be anti-flashing and provide a dead matt, non-reflective finish at all angles. It has excellent touching-in properties, providing near invisible touch-up for areas in critical lighting.
Application : Brush, roller or Airless spray. STIR THOROUGHLY BEFORE USE. Seal new or bare surfaces with a first coat of Dulux Trade Drywall Primer Sealer. The normal finishing process is 2 or 3 full coats of Dulux Trade Ultra Matt, but on previously painted surfaces in good condition where similar colours are used, 1 coat may be sufficient, however for significant colour change additional coats may be required.
BS4800
  • 1. Preparing the Surfaces
    To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). Remove all loose and defective paint. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead. See Dulux Trade Datasheet 549 for full information before use, available free on request by telephoning 0333 222 70 70 or visiting duluxtrade.co.uk.
  • 2. After use
    Cleaning After Final Use: Clean brushes and rollers immediately after final use to reuse them for future projects, saving you money and reducing waste. Cleaning Steps: 1. Remove Excess Paint: Scrape off leftover paint into a container for reuse. 2. Wash with Warm, Soapy Water: Clean brushes and rollers with warm soapy water in a sealed container like a bucket or tub. 3. Rinse Thoroughly: Rinse out all soap and paint residues into the same container. 4. Dry Naturally: Let tools air-dry and store in a dry, dust-free area. Dispose Responsibly: Settle Solids: Let paint solids settle at the bottom of the container. Pour off clear water for reuse or disposal. Disposal: Let remaining paint solids dry fully before disposing of them as solid waste. Do not flush paint down the drain, including when cleaning painting tools Pro Tip: Watch this cleaning guide from the British Coatings Federation and Dulux Connect contractor Bagnall’s: https://coatings.org.uk/general/custom.asp?page=HowToCleanPaintbrushes
  • 3. Storing
    Storing & Responsible Disposal Do not use or store paint in extreme temperatures and protect from damp & frost. Reuse, Recycle, or Donate- Whenever possible, reuse, recycle, or donate leftover paint. Find local services at recyclenow.com. If no Community RePaint service is nearby, consider advertising paint locally—many good causes need it to brighten community spaces. Dispose Responsibly- Never pour paint or wastewater down drains or sinks. Follow instructions at recyclenow.com to recycle empty packs. Reuse Roller Cages- Remove sleeves and store cages in a dry, dust-free place. Dispose of Unusable brushes and Sleeves- If brushes or sleeves cannot be cleaned or reused, dispose of them in general waste to avoid recycling issues. Paint Wash Water- Collect wash water in a container; don’t pour it into drains or on the ground. Let solids settle, pour off clear water for reuse or disposal, and let solids dry before disposing as solid waste. Do not flush paint down drains, including when cleaning tools.
Fetching the data, plz wait..