Dulux Trade Sterishield Dual Active Matt

Size
Paint Calculator
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Stain Resistant, Scrubbable, Cleanable
  • Highly Durable: Class 1 ISO 11998 and Type C BS 7719
  • Water-based
  • Anti-Viral & Anti-Bacterial
Technical characteristics
Technical Information
  • Finish Matt
  • Coverage Up to 16m² per litre
  • Drying Time Dependent on temperature and humidity
  • Recoatable 4-6 hours
  • Thinning Water 10
  • Composition Water-based
Product Features
  • Fantastic Dulux Quality

Product Description

Dulux Trade Sterishield Dual Active Matt is a quick drying, water-based coating containing in-film antimicrobial additives, which inhibits bacteria and viruses* within the paint film; it reduces populations of MRSA, E. coli, Coronaviruses and Human Herpesvirus. When combined with appropriate cleaning practices, Dulux Trade Sterishield Dual Active Matt helps to promote a more hygienic environment. It is a stain resistant, scrubbable, cleanable, durable matt emulsion and is suitable for all normal interior wall and ceiling surfaces. It achieves Class 1 ISO 11998 and Type C BS 7719 scrub ratings, meaning walls withstand daily wear and tear. Dulux Trade Sterishield Dual Active Matt is not a substitute for good hygiene practice.* Tested against certain types of bacteria and viruses:
· Tested to ISO 22196 with over 99% less viable E. coli and MRSA left after 2 hours when compared to a control (Sterishield Diamond Matt).
· Tested to ISO 21702 with:
. over 58 % less viable Feline coronavirus left after 1 hour compared to a control (Sterishield Diamond Matt),
. over 41 % less viable Human herpes virus HHV-1 left after 1 hour compared to a control (Sterishield Diamond Matt),
. over 76 % less viable Human coronavirus SARS-CoV-2 left after 1 hour compared to a control (Sterishield Diamond Matt).

Application Description

Application : Brush,roller or airless spray. STIR THOROUGHLY BEFORE USE. Seal new or bare surfaces with a thinned first coat of Dulux Trade Sterishield Dual Active Matt (up to 1 part clean water to 10 parts paint). The normal finishing process is 2 coats of Dulux Trade Sterishield Dual Active Matt. For best colour consistency, purchase sufficient tinted paint for each job including touch-in at one time from the same source.

Technical & Safety Documentation

  • dt_1023__sterishield_dual_active_matt_tds.pdf
  • dt_gb_en_sterishield_dual_active_matt_white.pdf
  • dt_gb_en_sterishield_dual_active_matt_gardenia.pdf
  • dt_gb_en_sterishield_dual_active_matt_light_base.pdf
  • dt_gb_en_sterishield_dual_active_matt_medium_base.pdf
  • dt_gb_en_sterishield_dual_active_matt_extra_deep_base.pdf

Colour Range

Colour Palette Fandeck, Dulux Trade Pro Colour Guide, Dulux Trade Commercial Colour Guide, National Colour Wall, BS4800, RAL Classic

Tips & Advice

  • 1. Preparing the Surfaces
    To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). See Dulux Trade Datasheet 1023 for full information before use, available free on request by telephoning 0333 222 70 70 or visiting duluxtrade.co.uk. Before surface preparation, read the Health & Safety information about old lead paints.
  • 2. Cleaning
    After use, remove as much paint as possible from equipment before cleaning with water
  • 3. Storing
    Do not use or store in extremes of temperature and protect from frost