Dulux Trade Quick Dry MDF Primer Undercoat

Dual purpose primer and undercoat
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Interior & exterior use
  • Primes and undercoats in one
  • For MDF surfaces
  • Water-based
Technical Information
  • Finish Matt
  • Coverage Up to 13m² per litre.
  • Drying Time Dependent on temperature and humidity
  • Recoatable 2 hours
  • Thinning Water 5
  • Composition Water-based
Product Features
  • Fantastic Dulux Quality
Dulux Trade Quick Drying MDF Primer Undercoat is a water-based primer suitable for use on MDF (Medium Density Fibreboard) surfaces both inside and outside. It is quick drying and low odour when compared to solvent-based primers.
Application: Brush, roller or spray. STIR THOROUGHLY BEFORE USE. Surfaces must be clean, dry, and free from all detective or poorly adhering material, dirt, grease, wax etc. Spot prime all nail heads and metal fixings with 1 coat of an appropriate Dulux Trade metal primer. Any surface defects should be filled with the appropriate Polycell Trade filler. Apply 1 coat of Dulux Trade Quick Dry MDF Primer Undercoat, followed by an appropriate Dulux Trade finish.
  • 1. Preparing the Surfaces
    To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). See Dulux Trade Datasheet 205 for full information before use, available free on request by telephoning 0333 222 70 70 or visting duluxtrade.co.uk. Before surface preparation read the Health & Safety information about old lead paints.
  • 2. After use
    Cleaning After Final Use: Clean brushes and rollers immediately after final use to reuse them for future projects, saving you money and reducing waste. Cleaning Steps: 1. Remove Excess Paint: Scrape off leftover paint into a container for reuse. 2. Wash with Warm, Soapy Water: Clean brushes and rollers with warm soapy water in a sealed container like a bucket or tub. 3. Rinse Thoroughly: Rinse out all soap and paint residues into the same container. 4. Dry Naturally: Let tools air-dry and store in a dry, dust-free area. Dispose Responsibly: Settle Solids: Let paint solids settle at the bottom of the container. Pour off clear water for reuse or disposal. Disposal: Let remaining paint solids dry fully before disposing of them as solid waste. Do not flush paint down the drain, including when cleaning painting tools Pro Tip: Watch this cleaning guide from the British Coatings Federation and Dulux Connect contractor Bagnall’s: https://coatings.org.uk/general/custom.asp?page=HowToCleanPaintbrushes
  • 3. Storing
    Storing & Responsible Disposal Do not use or store paint in extreme temperatures and protect from damp & frost. Reuse, Recycle, or Donate- Whenever possible, reuse, recycle, or donate leftover paint. Find local services at recyclenow.com. If no Community RePaint service is nearby, consider advertising paint locally—many good causes need it to brighten community spaces. Dispose Responsibly- Never pour paint or wastewater down drains or sinks. Follow instructions at recyclenow.com to recycle empty packs. Reuse Roller Cages- Remove sleeves and store cages in a dry, dust-free place. Dispose of Unusable brushes and Sleeves- If brushes or sleeves cannot be cleaned or reused, dispose of them in general waste to avoid recycling issues. Paint Wash Water- Collect wash water in a container; don’t pour it into drains or on the ground. Let solids settle, pour off clear water for reuse or disposal, and let solids dry before disposing as solid waste. Do not flush paint down drains, including when cleaning tools.
Fetching the data, plz wait..