Dulux Trade Quick Dry Gloss

80YR 74/043
Size
Paint Calculator
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • High gloss finish
  • Longer lasting whiteness
  • Tough, durable finish
  • Water-based
Product Features
  • Fantastic Dulux Quality
Technical Information
  • Finish Gloss
  • Coverage Up to 12m² per litre
  • Drying Time 1-2 hours, dependent on temperature and humidity
  • Recoatable 4-6 hours
  • Composition Water-based

Product Description

Dulux Trade Quick Dry Gloss is part 2 of an advanced 2 part water-based, high gloss system that provides a smooth, durable top coat for use on both interior wood and metal.

Application Description

Application: Brush, roller or spray. For best results use a good quality synthetic (nylon polyester) brush, designed for use with water-based paints. STIR THOROUGHLY BEFORE USE. Apply 1 or 2 coats of Dulux Trade Quick Dry Undercoat as required, followed by 1 or 2 coats of Dulux Trade Quick Dry Gloss. Where a strong colour change is involved 3 coats will be required. Newly painted doors and windows should not be closed (tightly) until the paint is fully dry.

Technical & Safety Documentation

  • DT_GB_EN_QUICK_DRY_GLOSS.pdf
  • dt_qd_gloss_breeam_attestation.pdf
  • EPD Quick Dry Gloss.PDF
  • dt_qd_gloss_leed_attestation.pdf
  • dt_550__quick_dry_gloss.pdf

Colour Range

Colour Futures 2020, Colour Futures 2022, Colour Palette Fandeck, Armstead Colour Guide, Dulux Trade Pro Colour Guide, Heritage, Dulux Trade Commercial Colour Guide, Colour Futures 2021, Colour Futures 2019, National Colour Wall, BS4800, RAL Classic, Weathershield Professional Colour Guide Masonry

Tips & Advice

  • 1. Preparing the Surfaces
    To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). See Dulux Trade Datasheet 550 for full information at duluxtrade.co.uk or by telephoning 0333 222 70 70. Before surface preparation, read the Health & Safety information about old lead paints. Water-borne coatings can be sensitive to rubber containing plasticisers such as flexible PVC strips. The paint film may partially dissolve due to these plasticisers and become sticky. It is advisable to replace such flexible strips with those made of EPDM rubber. We recommend that you seek the advice of the manufacturers of the strips regarding this problem.
  • 2. Cleaning
    After use, remove as much paint as possible from equipment before cleaning with water
  • 3. Storing
    Do not use or store in extremes of temperature and protect from frost