Products
Products
Dulux Trade Quick Dry Gloss

Dulux Trade Quick Dry Gloss

An advanced water-based, high gloss finish

05YY 72/254

Change Colour

Size

1L 2.5L 5L

Quantity

Paint Calculator

This product is not for online sale and can only be purchased from selected stores.

Find a Store

Your Measurements:

Amount Needed:

For the best result we recommend to use {coatAmount} for {productTitle}

Key benefits

High gloss finish
Longer lasting whiteness
Tough, durable finish
Water-based

Technical characteristics

Technical Information

Finish Gloss
Coverage Up to 12m² per litre
Drying Time 1-2 hours, dependent on temperature and humidity
Recoatable 4-6 hours
Composition Water-based

Product Features

Fantastic Dulux Quality

Product Description

Dulux Trade Quick Dry Gloss is part 2 of an advanced 2 part water-based, high gloss system that provides a smooth, durable top coat for use on both interior wood and metal.

Application Description

Application: Brush, roller or spray. For best results use a good quality synthetic (nylon polyester) brush, designed for use with water-based paints. STIR THOROUGHLY BEFORE USE. Apply 1 or 2 coats of Dulux Trade Quick Dry Undercoat as required, followed by 1 or 2 coats of Dulux Trade Quick Dry Gloss. Where a strong colour change is involved 3 coats will be required. Newly painted doors and windows should not be closed (tightly) until the paint is fully dry.
Airless Spray: For best results use a 208 or 308 Fine Finish tip @ 1100 - 1500 psi. (80 – 100 bar).
HVLP: For best results use a 1.8mm Fluid Set.
This paint may be susceptible to sagging when applied above 75 microns. For this reason, HVLP is the safer option as this method is naturally slower and more gentle and therefore easier to control.
The use of airless spray should only be considered by a competent and experienced sprayer for these products.
Please note that the above recommendations are intended as a guideline only and some adjustments may need

Technical & Safety Documentation

Download Adobe Reader

Colour Range

True Joy™ - Colour of the Year 2025, Weathershield Masonry Palette, Colour Futures 2020, Sweet Embrace™ - Dulux Colour of the Year 2024, Armstead Colour Guide, Colour Futures 2023, Colour Futures 2022, Colour Palette Fandeck, Dulux Trade Pro Colour Guide, Heritage, Dulux Trade Commercial Colour Guide, Colour Futures 2021, National Colour Wall, BS4800, RAL Classic, Weathershield Professional Colour Guide Masonry

Tips & Advice

1. Preparing the Surfaces

To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). See Dulux Trade Datasheet 550 for full information at duluxtrade.co.uk or by telephoning 0333 222 70 70. Before surface preparation, read the Health & Safety information about old lead paints. Water-borne coatings can be sensitive to rubber containing plasticisers such as flexible PVC strips. The paint film may partially dissolve due to these plasticisers and become sticky. It is advisable to replace such flexible strips with those made of EPDM rubber. We recommend that you seek the advice of the manufacturers of the strips regarding this problem.
2. Cleaning

After use, remove as much paint as possible from equipment before cleaning with water
3. Storing

Do not use or store in extremes of temperature and protect from frost

How much paint do I need?

Measure your dimensions

Do you know the area?

No Yes

Enter your measurements

Meters Centimeters

Paintable area

Width *

Height *

Area *

m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

Amount needed:

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator