Dulux Trade Plus Smartshield+

Invisible waterproofing coating, helping solid walls to stay dry from rain, improving thermal efficiency and cutting heat loss.
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Breathable ,water repellant coating that helps substrates dry improving thermal efficiency
  • Protects against rain,frost,UV & dirt for up to 10 years
Technical Information
  • Finish Matt
  • Coverage 2m²/ltr per coat
  • Drying Time 30 minutes
  • Recoatable 30 minutes
  • Composition Water-based
Product Features
  • Fantastic Dulux Quality
Dulux Trade Plus SmartShield+ is an exterior waterproofing coating that has been specifically formulated to reduce water ingress into substrates without sealing the surface, allowing it to breathe and dry-out, maximising the thermal efficiency of solid walls and reducing heat loss. Dulux Trade Plus SmartShield+ provides invisible protection helping walls to stay dry from rain and helps building exteriors maintain their natural beauty. Dulux Trade Plus SmartShield+ has a low viscosity formulation enabling efficient spray application across previously unsealed and undecorated substrates. Dulux Trade Plus SmartShield+ is water-based, has low odour and is quick drying Compared to untreated substrates
Shake the can well before use. Carefully decant into spray equipment & find the correct pressure following the spray manufacturer's instructions. The product is ready to use. Do not dilute. Hold the spray nozzle approx. 10cm from the surface. Ensure a low pressure is used to avoid excessive mist/overspray. Deep impregnation of the entire surface is required, so spray a thorough layer in a uniform manner across the surface from the bottom of the wall to the top. Spray over the surface until the surface can no longer absorb the coating. For very porous substrates apply 2 or 3 coats, leaving 30 minutes between coats. Less absorbent surfaces may only need to be treated once. The spreading rate depends on the roughness, nature and porosity of the substrate. On brickwork 2 coats would usually be required, with a spreading rate of up to 2 m²/ltr per coat. Can also be applied with a brush or roller.
  • 1. Preparing the Surfaces
    To get the best results with Dulux Trade Plus Smartshelid+ make sure any surfaces to be coated are sound and clean. Treat any areas affected by mould, lichens and algae with Weathershield Multi Surface Fungicidal Wash or steam cleaning equipment. Repair damaged joints, cracks and other defects with suitable materials. Ensure building/structural connections are sound for tightness and, if necessary repair. Cover/protect glass, windows, doors, metal and plastic surfaces as the product is very difficult to remove once dry. Fully protect any other items in the near vicinity from any possible over-spray e.g. plants and vehicles. Caution: Do not use Weathershield Stabilising Primer or other equivalent products that may seal the substrate. See the Dulux Trade Plus Smartshield+ Product Datasheet for full information before use, available free on request by telephoning 0333 222 70 70(ROI 021 422 0222) or visiting www.duluxtrade.co.uk.
  • 2. After use
    Cleaning After Final Use: Clean brushes and rollers immediately after final use to reuse them for future projects, saving you money and reducing waste. Cleaning Steps: 1. Remove Excess Paint: Scrape off leftover paint into a container for reuse. 2. Wash with Warm, Soapy Water: Clean brushes and rollers with warm soapy water in a sealed container like a bucket or tub. 3. Rinse Thoroughly: Rinse out all soap and paint residues into the same container. 4. Dry Naturally: Let tools air-dry and store in a dry, dust-free area. Dispose Responsibly: Settle Solids: Let paint solids settle at the bottom of the container. Pour off clear water for reuse or disposal. Disposal: Let remaining paint solids dry fully before disposing of them as solid waste. Do not flush paint down the drain, including when cleaning painting tools Pro Tip: Watch this cleaning guide from the British Coatings Federation and Dulux Connect contractor Bagnall’s: https://coatings.org.uk/general/custom.asp?page=HowToCleanPaintbrushes
  • 3. Storing
    Storing & Responsible Disposal Do not use or store paint in extreme temperatures and protect from damp & frost. Reuse, Recycle, or Donate- Whenever possible, reuse, recycle, or donate leftover paint. Find local services at recyclenow.com. If no Community RePaint service is nearby, consider advertising paint locally—many good causes need it to brighten community spaces. Dispose Responsibly- Never pour paint or wastewater down drains or sinks. Follow instructions at recyclenow.com to recycle empty packs. Reuse Roller Cages- Remove sleeves and store cages in a dry, dust-free place. Dispose of Unusable brushes and Sleeves- If brushes or sleeves cannot be cleaned or reused, dispose of them in general waste to avoid recycling issues. Paint Wash Water- Collect wash water in a container; don’t pour it into drains or on the ground. Let solids settle, pour off clear water for reuse or disposal, and let solids dry before disposing as solid waste. Do not flush paint down drains, including when cleaning tools.
Fetching the data, plz wait..