Dulux Trade Cladshield

A water-based mid-sheen formulation offering up to 8 years protection for cladding
Mineral Mist
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • For previously painted or weathered cladding
  • Highly durable
  • 8 year protection
Technical Information
  • Finish Matt
  • Coverage Up to 17m² per litre
  • Drying Time 2-4 hours
  • Recoatable 4-6 hours
  • Composition Water-based
Product Features
  • Fantastic Dulux Quality

Product Description

Cladshield from Dulux Trade offers exterior durability and protection for Plastisol coated and coil cladded buildings. The unique properties provide a tough and durable paint film that is suitable for application over previously painted and weathered cladding.

Application Description

Application: Brush, roller or spray. STIR THOROUGHLY BEFORE USE. The normal finishing process is a minimum of 2 coats of Cladshield from Dulux Trade. Where strong colours are used, additional coats will be required.

Technical & Safety Documentation

Colour Range

Weathershield Masonry Palette, Colour Futures 2020, Armstead Colour Guide, Sweet Embrace™ - Dulux Colour of the Year 2024, Colour Futures 2023, Colour Futures 2022, Colour Palette Fandeck, Dulux Trade Pro Colour Guide, Heritage, Dulux Trade Commercial Colour Guide, Colour Futures 2021, National Colour Wall, BS4800, RAL Classic, Weathershield Professional Colour Guide Masonry

Tips & Advice

  • 1. Preparing the Surfaces
    To get the best results, see Dulux Trade Datasheet 532 for full information before use, available free on request by telephoning 0333 222 70 70 or visiting duluxtrade.co.uk.
    Minimum Surface Preparation: Thoroughly clean the surface to remove dirt, grease and chalk. High pressure water jet or scrubbing manually are not recommended when re-coating existing Cladshield from Dulux Trade coatings. Treat any areas affected by mould, lichens and algae with a suitable fungicidal wash. Remove any poorly adhering or defective Plastisol coatings and manually or mechanically prepare bared surfaces to remove all contamination and corrosion. Any bare metal must be primed with a suitable Metalshield primer from Dulux Trade. Before surface preparation, read the Health & Safety information about old lead paints.
  • 2. Cleaning
    After use, remove as much paint as possible from equipment before cleaning with water
  • 3. Storing
    Do not use or store in extremes of temperature and protect from frost
Fetching the data, plz wait..