Dulux Trade Anti Graffiti Primer

Part 1 of a 2 part system. For use on sound, previously painted surfaces or sealed, bare concrete
Size
Paint Calculator
This product is currently out of stock, please visit a store or other online retailers.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Extra Durability
  • For use on bare or sealed surfaces
  • Interior & exterior use
  • Water-based
Technical Information
  • Finish Matt
  • Coverage Up to 10m² per litre
  • Drying Time 4-6 hours at 20º
  • Recoatable Minimum 16 hours
  • Composition Water-based
Product Features
  • Fantastic Dulux Quality

Product Description

Dulux Trade Anti Graffiti primer provides excellent adhesion on difficult surfaces which can then be overcoated with any Dulux Trade Emulsion followed by a coating of Dulux Trade Anti Graffiti Clear Coat. Dulux Trade Anti Graffiti Paint Clear Coat is a high performance water-based paint that is resistant to repeated washing, steam cleaning and solvent cleaning. It can be used where graffiti is a problem or as a hygienic coating e.g. hospitals, industrial kitchens and food and drink processing industries.

Application Description

Mixing Ratio: Supplied in correct proportions. Add all of the Activator to the Base container and mix thoroughly for at least 5 minutes, until the product is smooth and even. Do not mix part units. Badly activated or incorrectly mixed materials will affect performance and may cause early failure or discolouration.
Recommended Systems: STIR THOROUGHLY BEFORE USE. Primer: 1 coat of Dulux Trade Anti Graffiti Primer. Finish: 2 coats of Dulux Trade Diamond Eggshell/Matt followed by 1-2 Coats of Dulux Trade Anti-Graffiti Clear Coat. NOTE: Do not apply over underbound coatings e.g. distemper or non cross-linked flexible coatings e.g. Acrylated Rubber, Chlorinated Rubber. It is recommended that a small test area is applied before treating the entire surface to ensure compatibility. Pot Life; 2 hours (depending on prevailing conditions).

Technical & Safety Documentation

Download Adobe Reader

Tips & Advice

  • 1. Preparing the Surfaces
    To get the best results with Dulux Trade Anti Graffiti Primer, make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). See Dulux Trade Datasheet 813 for full information before use, available free on request by telephoning 0333 222 70 70 or visiting duluxtrade.co.uk. Before surface preparation, read the Health & Safety information about old lead paints.
  • 2. Cleaning
    After use, remove as much paint as possible from equipment before cleaning with water
  • 3. Storing
    Do not use or store in extremes of temperature and protect from frost

How much paint do I need?

Measure your dimensions

Do you know the area?

Enter your measurements

Paintable area

{{!-- The value will be injected with JavaScript --}}
{{!-- The value will be injected with JavaScript --}}
m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

{{!-- This value will be injected with JavaScript --}}

Amount needed:

{{!-- This value will be injected with JavaScript --}}

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator

Add a new job

  • Kitchen
  • Bedroom
  • Living Room

Add a new job

  • Kitchen
  • Bedroom
  • Living Room

Edit job

Delete job

Delete job

Are you sure? All notes, photos and saved items will be deleted.

Save Color

Save to My Workspace

Add to job

Dulux Trade Anti Graffiti Primer

Save to My Workspace

Sorry, we couldn't find any results
Fetching the data, plz wait..