Cuprinol Woodworm Killer (WB)

Treats & Prevents
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Prevents re-infestation
  • Long lasting
  • Low odour formula
  • Water based
Technical Information
  • Coverage Coverage can vary depending on application method and the condition and nature of the surface
  • Composition Water-based
Product Features
  • Kills woodworm

Product Description

Cuprinol Woodworm Killer (WB) is a clear water-based low odour formulation that kills all types of woodworm. Its deep penetration prevents re-infestation and ensures effective protection for years to come. Do not use on beehives or bee keeping equipment.

Application Description

Treat bare wood by flooding the surfaces with 2 or 3 brush coats. Pay particular attention to end grain, corners, joints, crevices etc. Re-treat any surfaces cut after treatment and all replacement timber. To treat existing attacks of wet or dry rot use Cuprinol 5 Star Complete Wood Treatment(WB)*. This product may cause darkening of some timbers. If colour is critical, apply a test area first and allow to dry fully to ensure final appearance is acceptable. Most decorative finishes such as solvent based or water based paints, woodstains, varnishes, polishes etc can be applied after the fluid has dried. Rough sawn timber will absorb up to twice as much as planed wood. Eradication of insect attack including House Longhorn Beetle: Brush 2-3 uniform coats. Use a minimum of 1 litre per 3.5-5 sq. metres of timber. Replacement timbers liable to House Longhorn and woodworm attack: Dip for at least 3 minutes or brush 2-3 uniform flood coats. Use a minimum of 1 litre per 3.5-5 sq. metres of timber. Ensure timber is fully dry (allow 3 days) before laying plastic floor tiles, foam or rubber backed carpet, underlay, insulation in lofts, etc. After full drying, most glues, fillers and knotting solutions can be used as normal.

Technical & Safety Documentation

Tips & Advice

  • 1. Preparing the Surfaces
    Eradication is best achieved if the wood is bare, dry and clean. Wood that has been woodstained, painted, or varnished should be stripped back to bare wood and treated as bare wood. When treating roof joists, first remove insulation and do not relay for at least 36 hours or until treatment is dry. Remove insulation and protect electrical sockets, fuse boxes, etc. Do not use on antique furniture or other water sensitive items.
  • 2. Cleaning
    After use remove as much product as possible from brushes before cleaning with water
  • 3. Storing
    Do not use or store in extremes of temperature
Fetching the data, plz wait..