Armstead Trade Pliolite Based Masonry Paint

Size
Paint Calculator
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Up to 15 years protection
  • Resistant to moisture and alkali attack.
  • Can be applied down to -5°C
  • Solvent based
Technical characteristics
Technical Information
  • Finish Matt
  • Coverage Up to 8m2/litre depending upon surface texture
  • Drying Time 1-1.5 hours
  • Recoatable 12 hours
  • Thinning White Spirit 10
  • Composition Solvent-based
Product Features
  • Excellent coverage
  • Durable

Product Description

Armstead Trade Pliolite Based Masonry Paint is a professional quality, durable, solvent-based smooth masonry paint. Based on Pliolite® Acrylated Rubber resins, it provides a long lasting coating with good adhesion and resistance to moisture and alkali attack. It is easy to apply and provides good coverage. Armstead Trade Pliolite® Based Masonry is much more tolerant to showery or cold weather during application than traditional water-based exterior masonry paints, and can be applied to exterior masonry surfaces at virtually any time of the year. It is also BBA certified to provide up to 15 year protection.

Application Description

STIR THOROUGHLY BEFORE USE. The normal finishing process is 1 or 2 coats of Armstead Trade Pliolite® Based Masonry. Touch dry 1-1.5 hours at 20ºC/65%RH. Recoat: 12 hours @ 20°C/65%RH. Drying time will vary according to temperature and humidity e.g. the drying times quoted will be significantly longer in cold, damp conditions. Coverage up to 8m²/l depending on surface texture. These figures are only an approximate guide and may be reduced. If in doubt, apply a small trial area first.

Technical & Safety Documentation

  • AM_GB_EN_PLIOLITE®_BASED_MASONRY_PAINT.pdf
  • AM304_Pliolite Based Masonry.pdf

Colour Range

Armstead Colour Guide, BS4800, RAL Classic

Tips & Advice

  • 1. Preparing the Surfaces
    To get the best results with Armstead Trade Pliolite® Based Masonry, make sure surfaces to be painted are sound, clean and dry (new surfaces must be fully dry). See Armstead Trade Datasheet AM304 for full information before use, available free on request by telephoning 0333 222 7070 or visiting armsteadtrade.co.uk. Before surface preparation, read the adjacent information about old lead paints.
  • 2. Cleaning
    After use, remove as much paint as possible from equipment before cleaning with brush cleaner
  • 3. Storing
    Do not use or store in extremes of temperature.