Armstead Trade Anti Slip Floor Paint

Paint Calculator
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Textured protective floor finish
  • Reduces the risk of slipping
  • Ideal for ramps,staircases and walkways
  • Solvent based
Technical characteristics
Technical Information
  • Finish Matt
  • Coverage Up to 8m2/litre
  • Drying Time 1 hour
  • Recoatable 6 hours
  • Composition Solvent-based
Product Features
  • Excellent coverage

Product Description

Armstead Trade Anti-Slip Floor Paint is a professional quality, ready-mixed anti-slip floor coating that provides a consistent textured finish. Suitable for interior and exterior use on concrete, wood and metal surfaces.
Particularly suited for access ramps, staircases, walkways, etc.

Application Description

STIR THOROUGHLY BEFORE USE. Seal new or bare surfaces with a thinned first coat of Armstead Trade Floor Paint (up to 1 part white spirit to 10 parts paint). The normal finishing process is 2 full coats of Armstead Trade Anti-Slip Floor Paint. Touch dry: 1 hour. Recoat: 6 hours. Useable in 48 hours. Drying times will be extended at low temperature. Full hardness is not reached for 7 days. Try to avoid excessive wear and tear during this period. Coverage: up to 8m²/l on smooth surfaces of average porosity.

Technical & Safety Documentation

Application: Brush or roller only. For Health and Safety reasons related to all solvent based paints, spray application is not recommended.
  • AM306_Anti Slip Floor Paint.pdf

Colour Range

Armstead Colour Guide, BS4800

Tips & Advice

  • 1. Preparing the Surfaces
    To get the best results with Armstead Trade Anti-Slip Floor Paint, make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). See Armstead Trade Datasheet AM306 for full information before use, available free on request by telephoning 0333 222 7070 or visiting Before surface preparation, read the adjacent information about old lead paints.
  • 2. Cleaning
    After use, remove as much paint as possible from equipment before cleaning with brush cleaner.
  • 3. Storing
    Do not use or store in extremes of temperature.