Powered by you and
Brands from AkzoNobel

hammerite

Direct to Rust Metal Paint - Smooth Finish
hammerite

Direct to Rust Metal Paint - Smooth Finish

Hammerite Direct to Rust Metal Paint is specially formulated to perform as primer,
undercoat and topcoat in one.

Key benefits

  • Direct to rust.
    Easy to use.
    8 year corrosion protection.
    Ultra tough.
    Stops rust.
    Excellent weather resistance.

Datasheets

Direct to Rust Metal Paint - Smooth Finish safety datasheet (SDSHM101)

Application information

Coverage
5sq m per litre
Touch dry
See datasheet
Recoatable
See datasheet
Thinning
See datasheet

Pack sizes

  • 250ml, 750ml, 2.5l, 5l

System information

Abrade smooth surfaces and remove all loose rust and flaking paint with a wire brush.
Remove dirt, dust and grease with diluted detergent. Rinse with clean water and allow time to dry.
Paint a test patch of Hammerite Direct to Rust Metal Paint Smooth onto painted surfaces and leave for 1 hour. If there is no reaction apply Hammerite Direct to Rust Metal Paint directly to surface.
If there is a reaction, remove all paint before applying Hammerite Direct to Rust Metal Paint.
On bare zinc, aluminium and galvanised surfaces apply Hammerite Special Metals Primer before applying Hammerite Direct to Rust Metal Paint.

Ideal application temperature 8°C to 25°C.
Lightly stir before use. Do not mix vigorously.
Brush application: Do not thin. On previously painted metal in sound condition, 1 coat should be sufficient. On bare/rusty metal 2 coats are required. Ensure that all edges and corners are adequately covered. Do not over-apply as sagging will occur.