Powered by you and
Brands from AkzoNobel

dulux trade

Weathershield Quick Dry Exterior Gloss
dulux trade

Weathershield Quick Dry Exterior Gloss

A water-based gloss finish which is part of a paint system specially developed to give long lasting protection to exterior wood. The Weathershield Quick Dry Exterior Gloss system will provide extensive protection for up to six years if correctly applied as per the instructions for use. Contains a fungicide to inhibit mould growth on the paint film and help it stay cleaner for longer.

Key benefits

  • 6 Year All Weather Protection; Tough & Durable Protection; Coverage up to 16m2 Per Litre

Datasheets

Weathershield Quick Dry Exterior Gloss product datasheet (534)
Weathershield Quick Dry Exterior Gloss safety datasheet (SDS534)

Application information

Coverage
Up to 16m2 per litre
Touch dry
2 hours
Recoatable
Up to 4 hours
Thinning
This product should not be thinned.

Pack sizes

  • 1L, 2.5L, 5L

System information

To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces must be fully dry). See Dulux Trade Datasheet 534 for full information before use available at www.duluxtrade.co.uk or by telephoning 0333 222 70 70. Before surface preparation read the Health & Safety information about old lead paints.

STIR THOROUGHLY BEFORE USE. Prime all bare wood with 2 coats of Weathershield Preservative Primer +(BP) followed by 1 coat of the appropriate coloured Weathershield Quick Dry Exterior Undercoat. Finish with 2 coats of Weathershield Quick Dry Exterior Gloss. Where a special process colour is to be used or a strong colour change is required, additional coats will be required (see appropriate Dulux Trade colour card). Allow a minimum of 2 hours before overcoating Weathershield Quick Dry Exterior Undercoat. Allow up to 4 hours before applying a second coat of Weathershield Quick Dry Exterior Gloss. For best colour consistency, purchase sufficient tinted paint for each job including touch-in at one time from the same source.

After use, remove as much paint as possible from brushes before cleaning with water.