Powered by you and
Brands from AkzoNobel

dulux trade

Weathershield Maximum Exposure Smooth Masonry
dulux trade

Weathershield Maximum Exposure Smooth Masonry

Provides exterior durability and protection even in harsh and demanding environments, containing an added fungicide to inhibit mould growth on the paint film. The unique properties provide a tough and flexible paint film that is up to 5 times more flexible than conventional masonry paints, covering hairline cracks and preventing subsequent cracking or flaking. Suitable for application to bare and previously painted surfaces, including solvent-based finishes. Shower resistant within 15 minutes of application.

Key benefits

  • 15 Year All Weather Protection; For use in Demanding Environments; 5 x More Flexible than Standard

Datasheets

Weathershield Maximum Exposure Smooth Masonry product datasheet (522)
Weathershield Maximum Exposure Smooth Masonry safety datasheet (SDS522)

Application information

Coverage
Up to 14m2 per litre
Touch dry
Normally touch-dry after 30 minutes
Recoatable
2-4 hours
Thinning
This product can be thinned - see datasheet for full details.

Pack sizes

  • 5L

System information

For the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces must be fully dry). See Dulux Trade Datasheet 522 for full information, available at www.duluxtrade.co.uk or by telephoning 0333 222 70 70. Before surface preparation, read the Health & Safety information about old lead paints.

STIR THOROUGHLY BEFORE USE. Seal new or bare surfaces with a thinned first coat of Weathershield Maximum Exposure Smooth Masonry (up to 1 part water to 5 parts paint). The normal finishing process is 2 full coats of Weathershield Maximum Exposure Smooth Masonry, but on previously painted surfaces in good condition, where similar colours are used, 1 coat may be sufficient. Suitable for application to surfaces previously painted with masonry paint, including solvent-based finishes. For best colour consistency, purchase sufficient tinted paint for each job including touch-in at one time from the same source.

After use remove as much paint as possible from brushes before cleaning with water.