Powered by you and
Brands from AkzoNobel

dulux trade

Weathershield All Seasons Smooth Masonry
dulux trade

Weathershield All Seasons Smooth Masonry

A flexible, smooth, solvent-based masonry paint ideal for use all-year round on exterior walls. Based on patented AkzoNobel technology, it gives up to 15 years lasting protection and is particularly suitable for use in difficult climates. Its unique NAD technology results in quick drying and recoat times, even in very cold conditions and enables it to withstand rainfall within 15 minutes of application. Easy to apply, with excellent opacity, it contains a fungicide to inhibit mould growth on the paint film and is not prone to yellowing.

Key benefits

  • 15 Year All Weather Protection; Shower Resistant within 15 Minutes; Can Be Applied Down To 5C

Datasheets

Weathershield All Seasons Smooth Masonry product datasheet (420)
Weathershield All Seasons Smooth Masonry safety datasheet (SDS420)

Application information

Coverage
Up to 16m2 per litre
Touch dry
Normally touch dry after 30 minutes
Recoatable
1-2 hours
Thinning
This product can be thinned - see datasheet for full details.

Pack sizes

  • 4.5L, 5L

System information

To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces must be fully dry). Treat any areas affected by mould, lichens and algae with a suitable fungicidal wash. See Dulux Trade Datasheet 420 for full information, available at www.duluxtrade.co.uk or by telephoning 0333 222 70 70. Before surface preparation, read the Health & Safety information about old lead paints.

STIR THOROUGHLY BEFORE USE. Seal new or bare surfaces with a thinned first coat of Weathershield All Seasons Smooth Masonry (up to 1 part white spirit to 10 parts paint). The normal finishing process is 2 full coats of Weathershield All Seasons Smooth Masonry, but on previously painted surfaces in good condition, where similar colours are used, 1 coat may be sufficient. For best colour consistency, purchase sufficient tinted paint for each job including touch-in at one time from the same source.

After use, remove as much paint as possible from brushes before cleaning with brush cleaner.