Weathershield All Seasons Smooth Masonry Gloss
A flexible solvent-based masonry paint, ideal for use on exterior masonry. Based on patented AkzoNobel technology, this high gloss finish provides excellent durability. Easy to apply with excellent opacity. It contains a fungicide to inhibit mould growth on the paint film and is not prone to yellowing. Weathershield All Seasons Smooth Masonry Gloss may be applied to surfaces previously painted with masonry paint, including solvent-based finishes.
- 10 Year All Weather Protection; Can Be Applied Down To 5C; High Sheen Finish
- Weathershield All Seasons Smooth Masonry Gloss product datasheet (429)
- Weathershield All Seasons Smooth Masonry Gloss safety datasheet (SDS429)
- Up to 16m2 per litre
- Touch dry
- Normally touch dry after 4 hours
- 16 hours
- This product can be thinned - see datasheet for full details.
- 4.5L, 5L
To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces must be fully dry). Treat any areas affected by mould, lichens and algae with a suitable fungicidal wash. See Dulux Trade Datasheet 429 for full information, available at www.duluxtrade.co.uk or by telephoning 0333 222 70 70. Before surface preparation, read the Health & Safety information about old lead paints.
STIR THOROUGHLY BEFORE USE. Seal new or bare surfaces with a thinned first coat of Weathershield All Season Smooth Masonry Gloss (up to 1 part white spirit to 10 parts paint). Surfaces that remain powdery, friable or chalky after thorough preparation should be sealed with a coat of Weathershield Stabilising Primer. The normal finishing process is 2 full coats of Weathershield All Seasons Smooth Masonry Gloss, but on previously painted surfaces in good condition, where similar colours are used, 1 coat may be sufficient. Suitable for application to surfaces previously painted with masonry paint, including solvent-based finishes. For best colour consistency, purchase sufficient tinted paint for each job including touch-in at one time from the same source.
After use, remove as much paint as possible from brushes before cleaning with brush cleaner.