Powered by you and
Brands from AkzoNobel

dulux trade

Sterishield Diamond Matt
dulux trade

Sterishield Diamond Matt

A quick drying, water-based coating containing an in-film bactericide, which inhibits bacteria and reduces populations of MRSA and E. coli. When combined with appropriate cleaning practices, Sterishield Diamond Matt from Dulux Trade helps to promote a more hygienic environment. It is a tough, scrubbable, durable, stain resistant matt emulsion and is suitable for all normal interior wall and ceiling surfaces. Sterishield Diamond Matt from Dulux Trade is not a substitute for good hygiene practice.

Key benefits

  • Anti-Bacterial; Tough, Scrubbable & Stain Resistant; Contains an Active Silver Bactericide

Datasheets

Sterishield Diamond Matt product datasheet (519)
Sterishield Diamond Matt safety datasheet (SDS519)

Application information

Coverage
Up to 16m2 per litre
Touch dry
Dependent on temperature/humidity
Recoatable
4-6 hours
Thinning
This product can be thinned - see datasheet for full details.

Pack sizes

  • 5L

System information

To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). See Dulux Trade Datasheet 519 for full information before use, available free on request by telephoning 0333 222 70 70 or visiting duluxtrade.co.uk. Before surface preparation, read the Health & Safety information about old lead paints.

STIR THOROUGHLY BEFORE USE. Seal new or bare surfaces with a thinned first coat of Sterishield Diamond Matt from Dulux Trade (up to 1 part clean water to 10 parts paint). The normal finishing process is 2 coats of Sterishield Diamond Matt from Dulux Trade, but on previously painted surfaces in good condition, where similar colours are used, 1 coat may be sufficient. For best colour consistency, purchase sufficient tinted paint for each job at one time from the same source.

After use, remove as much paint as possible from equipment before cleaning with water.