- Tough Durable Finish; Self Undercoating; Dirt Resistant
- Up to 17m2 per litre
- Touch dry
- 4-6 hours
- 16-24 hours
- Thinning not generally required.
- 1L, 2.5L, 5L
To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). See Dulux Trade Datasheet 406 for full information before use, available free on request by telephoning 0333 222 70 70 or visiting duluxtrade.co.uk. Before surface preparation, read the Health & Safety information about old lead paints.
STIR THOROUGHLY BEFORE USE. The normal finishing process is 2 full coats of Dulux Trade Satinwood. However, where a strong colour change is required, then a coat of an appropriate coloured Dulux Trade Undercoat may be necessary.
For best colour consistency, purchase sufficient tinted paint for each job including touch-in at one time from the same source.
Whilst leading-edge technology has been used in the development of this product, the nature of white solvent-based paints means that they will all discolour over time. The rate of discolouration is faster on areas with no or low natural or UV light. For long-lasting whiteness, we recommend the use of a water-based formulation such as Dulux Trade Quick Dry Satinwood.
After use, remove as much paint as possible from brushes before cleaning with brush cleaner.