Powered by you and
Brands from AkzoNobel

dulux trade

Satinwood
dulux trade

Satinwood

Solvent-based satin finish formulation that is tough, hardwearing and dirt resistant. Does not require an undercoat except where a strong colour change is required. Suitable for use on interior wood and metal surfaces.

Key benefits

  • Tough Durable Finish; Self Undercoating; Dirt Resistant

Datasheets

Satinwood product datasheet (406)
Satinwood safety datasheet (SDS406)

Application information

Coverage
Up to 17m2 per litre
Touch dry
4-6 hours
Recoatable
16-24 hours
Thinning
Thinning not generally required.

Pack sizes

  • 1L, 2.5L, 5L

System information

To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). See Dulux Trade Datasheet 406 for full information before use, available free on request by telephoning 0333 222 70 70 or visiting duluxtrade.co.uk. Before surface preparation, read the Health & Safety information about old lead paints.

STIR THOROUGHLY BEFORE USE. The normal finishing process is 2 full coats of Dulux Trade Satinwood. However, where a strong colour change is required, then a coat of an appropriate coloured Dulux Trade Undercoat may be necessary.
For best colour consistency, purchase sufficient tinted paint for each job including touch-in at one time from the same source.
Whilst leading-edge technology has been used in the development of this product, the nature of white solvent-based paints means that they will all discolour over time. The rate of discolouration is faster on areas with no or low natural or UV light. For long-lasting whiteness, we recommend the use of a water-based formulation such as Dulux Trade Quick Dry Satinwood.

After use, remove as much paint as possible from brushes before cleaning with brush cleaner.